Industrial reliability consulting

Reliability advice from the people who rewind the motors.

Frederick Industrial helps plants keep motors, drives, gearboxes, and the rest of their rotating equipment running. We diagnose why equipment fails, build maintenance programs that catch the next failure early, and tell you straight when to repair and when to replace. Every recommendation is backed by what we see on our own teardown benches.

Federal & municipal contractorCAGE 24CK7UEI Y73ANH34YLZ8

1 DayWritten quote after teardown, itemized by operation
$0 SurprisesNo repair work starts without your written approval
Before / AfterIncoming and final test readings with every motor
Plain AdviceRepair-vs-replace math shown, not just a verdict
Consulting

Stop paying for the same failure twice.

Most consultants have never had a failed winding on their bench. We take motors apart for a living, so our advice starts from evidence: insulation readings, bearing fits, contamination, and the probable cause written down.

PRACTICE 01 · FLAGSHIP

Root cause failure analysis

When a critical motor or gearbox fails, we tear it down, photograph every stage, measure fits against tolerance, and tell you why it died: application, installation, power quality, lubrication, or age.

  • Written failure report with photos
  • Probable cause and contributing factors
  • Corrective actions ranked by cost
PRACTICE 02

Predictive maintenance programs

Route-based vibration, insulation resistance trending, thermal checks, gearbox oil sampling, and drive fault-log reviews on the equipment that matters most, so you hear about the next failure weeks early.

  • Criticality ranking of your assets
  • Baseline readings and alarm limits
  • Quarterly trend reports
PRACTICE 03

Motor fleet survey

We walk your plant and build the motor inventory you wish you had: nameplate data, condition, criticality, and which units have a spare on the shelf.

  • Complete nameplate database
  • Spares gap list
  • Standardization opportunities
PRACTICE 04

Repair-vs-replace policy

A written rule your team can apply without calling anyone. We compare repair cost, replacement cost, efficiency gains, and lead time, then set the threshold for each motor class.

  • Repair-or-replace rules for each motor size and frame
  • Energy payback calculations
  • Obsolete-frame watch list
PRACTICE 05

Critical spares strategy

Decide which motors, gearboxes, bearings, and drives to stock, which to keep a repair slot for, and which can wait. Inventory sized to your downtime cost, not a guess.

  • Downtime cost model
  • Stock, pool, or order-on-fail
  • Spare rotation and storage care
PRACTICE 06

Maintenance operations review

We look at how work moves through your maintenance team, from the call to the closed work order, and fix the steps where time and money leak out.

  • Work order flow mapping
  • Vendor repair specifications
  • KPIs you can actually track
Shop & field

The advice comes with a working shop.

Motors, drives, gearboxes, and the tools that keep a plant moving. When the recommendation is "repair it," you don't have to find someone else. Our shop and field crews do the work, to the same documented standard.

Motor repair & rewind

AC and DC motors, from fractional horsepower to large industrial frames. Incoming test, full teardown inspection, rewind, bearing and machine work, balance, dip-and-bake, and final test.

RewindsBearing jobsShaft & housing machiningDynamic balanceSurge testing

Field service

Troubleshooting, installation, alignment, and on-site diagnostics. We confirm your site safety requirements before the truck rolls and leave a signed ticket before we go.

Emergency callsLaser alignmentOn-site testingInstallation

Variable frequency drives

Drive troubleshooting, programming, installation, and replacement, handled together with the motor it runs. We check drive settings, cabling, grounding, and inverter-duty ratings, because a lot of motor failures start at the drive.

Fault diagnosisParameter setupCommissioningDrive replacementBearing current protection

Gearboxes & reducers

Inspection, rebuild, and replacement of gearboxes and speed reducers. We tear them down, measure gear and bearing wear, and tell you whether a rebuild or a new unit makes more sense.

Teardown inspectionBearing & seal replacementRebuildsReplacement units

Motors, parts & counter

Replacement motors, bearings, and supplies, matched by frame, mounting, and shaft dimensions, not just horsepower. Bring the old nameplate and we'll find what fits.

New motorsBearings & sealsSpecial ordersWill-call
Shop online ↗

Milwaukee tool service

Authorized service center for Milwaukee tools. Retail sales, in-warranty claims handled for you, and honest out-of-warranty estimates, including when a new tool is the better buy.

Warranty repairOut-of-warranty repairTool sales
Shop Milwaukee Tools ↗
How we work

Eight gates. Every job.

Shop repair, field call, or counter order, every job moves through the same eight steps. You always know where your equipment is, and you approve the cost before any repair work begins.

  1. Intake

    Tagged with a job number and photographed on arrival.

  2. Assess

    Tested and inspected. Findings written down.

  3. Price

    Itemized by operation: labor, parts, freight.

  4. Authorize

    You approve in writing before repair starts.

  5. Execute

    Repaired to scope. New damage means a call first.

  6. Verify

    Final test recorded. QC signed by a second person.

  7. Deliver

    Every accessory returned, checked against intake.

  8. Invoice

    Matches the quote plus any change you approved.

● Gates 4 and 6 are hard stops: no approval, no work; no signed test, no shipment.
Proof of repair

You get the numbers, not just the motor.

Every repaired motor ships with a final test report that sits next to the readings we took the day it arrived. That comparison is the proof the repair worked, and it goes straight into your maintenance records.

  • Actual readings, not pass/fail. Insulation resistance, winding resistance, no-load current on all three phases, vibration.
  • Conditions recorded. Ambient temperature and humidity with every insulation reading.
  • Probable cause of failure. So the next one doesn't fail the same way.
FINAL TEST & QC · FORM A-5SAMPLE
JOBFI-26-0418
RATING50 HP · 460 V
FRAME326T · TEFC
AMBIENT22 °C · 41 % RH
TestIncomingFinalResult
Insulation resistance (1 min, 1000 V)1.8 MΩ4,200 MΩPASS
Polarization index1.13.4PASS
Winding resistance T1–T20.142 Ω0.131 ΩPASS
Winding resistance T2–T30.139 Ω0.131 ΩPASS
Winding resistance T3–T10.155 Ω0.132 ΩPASS
No-load current L1 / L2 / L3—17.8 / 17.6 / 17.9 APASS
Vibration, overall velocity0.41 in/s0.06 in/sPASS
Bearing temp after 30 min run—38 °CPASS
Probable cause: moisture ingress, conduit box seal failedQC: ________
Engagements

Three ways to start.

Start small with one failure or one site walk. Most clients move to an ongoing program once they see what the first report turns up.

One failure

Failure investigation

A motor failed and you need to know why before you put another one in its place.

  • Teardown and inspection
  • Written root cause report
  • Repair or replace recommendation
One site

Reliability assessment

A plant walk, a motor fleet survey, and a ranked list of what to fix first.

  • Criticality ranking
  • Baseline condition readings
  • Prioritized action plan
Ongoing

Reliability program

Scheduled condition monitoring and trend reporting, with our shop on call when something needs to come out.

  • Quarterly monitoring routes
  • Trend reports and alerts
  • Priority shop scheduling
ManufacturingWater & wastewaterFood & beverageMaterial handlingPumps & fansHVAC & facilitiesAgricultureAggregates
Public sector

Serving federal and municipal agencies.

Frederick Industrial is an established contractor to federal and municipal government customers, providing motor, drive, and gearbox repair, field service, and reliability consulting for public facilities and utilities.

Our work is built for public procurement. Every job carries a written, itemized quote, a purchase order reference, documented test results, and a signed delivery record, giving contracting officers and auditors a complete file from request to invoice.

CONTRACTING INFORMATION
CAGE code
24CK7
UEI
Y73ANH34YLZ8
NAICS
Registered under multiple codes; full list available on request
Customers
Federal agencies · Municipal governments
Capabilities
Motor repair & rewind · VFDs · Gearboxes · Field service · Reliability consulting
Records
Itemized quotes · Test & QC reports · Signed delivery receipts
Capability statement available on request.

Line down?

Our service line is answered 24/7. Have the nameplate, the site contact, and your PO number ready and we can dispatch faster.

Contact

Tell us what's running hot.

Send a few details and we'll come back with next steps within one business day.

Have these handy
  • A photo of the nameplate
  • What happened, in your words
  • Whether the line is down or a spare is running
  • Your PO number, if your company requires one
We'll format your request so you can email it to info@frederickindustrial.com.